Jetting Vortex KZ1 / KZ2 Kart

Jetting Vortex KZ1 / KZ2 Kart」はJet Lab, LLCが配信するiPhoneアプリです。
このページではランキングや価格推移、評価点などアプリ情報を見ることができ、Jet Lab, LLCのその他アプリや、独自カテゴリー毎のアプリを探せます。

Jetting Vortex KZ1 / KZ2 Kart

販売元:Jet Lab, LLC

独自評価点数

未評価

公式レビュー数

0件

現在の価格

¥1,800
App Storeでこのアプリをダウンロードする

公式スクリーンショット

公式説明

This app provides for the current weather conditions and a given engine configuration (engine model, floats, carb bore, emulsion tube type, floats, oil ratio, fuel type), 12 !!!!! jetting recommendations for Vortex RTZ, RSZ, RKZ, RVZ, RVXX, RVX, RVS engines that have DellOrto VHSH 30 carbs.

This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. If more accuracy is needed, a portable weather station can also be used.

• 12 different jetting setups!
• For each jetting setup, the following values are given: main jet, emulsion tube, needle type and position (including intermediate positions with washer), throttle valve, idle jet (outer pilot jet), idle emulsifier (inner pilot jet), air screw position
• Fine tuning for all these values
• You can create your carburetor and check the performance (over 90 needles available)
• History of all your jetting setups
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Support two idle emulsion tube types (DP or DQ)
• Selectable throttle valve Size
• Selectable carb bore
• Selectable fuel octane
• Adjustable fuel/oil ratio
• large selection of floats
• Adjustable floats height
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Supports international configuration
• Possibility of use automatic weather data or a portable weather station.
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures.

The application contains five tabs, which are described next:

• Results: In this tab, 12 different jetting setups are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and needle position, idle emulsifier (inner pilot jet) and idle jet (outer pilot jet), throttle valve, air screw position. Under the recommended main jet, the calculated real value with decimals is shown.
This tab lets do a fine tuning adjustment for all this values for each jetting setup to adapt to the concrete engine.
You can also see in a graphic form the calculated ratio of air and fuel (lambda).

• History: This tab contains the history of all jetting setups. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history.

• Compare: On this tab, you can compare two carburetors. To do this, you need to set all the components of the carburetor. The result will be shown in the form of graphs of the ratio of air and fuel (or lambda).

• Engine: You can configure in this screen the information about the engine, that is, engine model (Vortex RTZ, RSZ, RKZ, RVZ, RVXX, RVX, RVS), carburetor diameter, emulsion tube type, float type and height, fuel type, oil mix ratio and type of the circuit. Depending of this parameters, the jetting setups will be adapted.
Also on this tab you can find the fuel calculator (click on the gas station icon).

• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off.


If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.

DZHET LAB, CHASTNOE PREDPRIYATIE

バージョンアップ・新機能情報

2019年04月22日 にバージョン1.3.1が 更新されました。

【更新内容】

• New feature: Weather for custom location. You can manually select any place in the world and the optimum carburation will be calculated for it (for altitude and current weather conditions in this place). If you plan go to a race in another city or to the mountains for example, you easily can pre-adjust the carburetor.
• New feature: Compare. You can create your custom carburetor configurations, check, compare. More than 90 needles are available (almost all needles from the K and U series).

App Storeでこのアプリをダウンロードする

公式レビュー

アプリ詳細

リリース日 2019年02月07日
更新 2019年04月22日
バージョン 1.3.1
サイズ 45.32 MB
販売元 Jet Lab, LLC
言語 日本語対応 英語対応